Installation manual

FA-300 Series LCD Version Installation and Operation Manual
59
11. Bypass Det Ckt (Command-Menu)
12. Bypass NAC Ckt (Command-Menu)
13. Aux. Disconnect (Command-Menu)
Note: Refer to How to Use the Keypad to Program the FA-300 on page 39 for detailed instructions on
making menu selections.
Initiating zones may be bypassed
individually. This bypass command will
allow you to scroll through all initiating
zones 1 to a maximum of 12 depending
on the size of the panel.
Press Enter to bypass the zone or scroll
up or down to un-bypassed (normal
connected circuit).
Press Enter to un-bypass the zone or
scroll up or down to bypass (off normal
unconnected circuit).
Indicating zones may be bypassed
individually. This bypass command will
allow you to scroll through all indicating
zones 1 to a maximum of 4 depending on
the size of the panel.
Press Enter to bypass the zone or scroll
up or down to un-bypassed (normal
connected circuit).
Press Enter to un-bypass the zone or
scroll up or down to bypass (off normal
unconnected circuit).
Use the up or down keys to change from
YES to NO. This selection work like a
switch. If Yes this command disconnects
the auxiliary alarm relay and associated
relays as long as the Aux disc feature
has be enabled.
Bypass Det Zone
1.Zone-1
[ ]Bypassed
[ ]Un-Bypassed
Bypass Det Zone
1.Zone-1
[ ]Bypassed
[ ]Un-Bypassed
Disconnect Aux
Relay?[Y]