Installation manual

FA-300 Series LCD Version Installation and Operation Manual
53
Command Menu/Dialer Config/Account
Info
2.Account#1 Telephone Number
[ 101 ]->Default
Use this function to set the telephone
number of the monitoring station. The
maximum # of digits allowed is 19
including “,” and numerals. The “,”
will be treated as 1 sec delay. To
enter “,” press the INFO button.
Press # to move the cursor to the
right or press * to move it to the left.
An example of a typical telephone #
is 9,,12345678.
Command Menu/Dialer Config/Account
Info
3.Account#1 Reporting Format
[X] CONTACT ID-Def
[ ] SIA 300 Baud
[ ] SIA 110 Baud
Set the reporting format that is
recognized or preferred by the
monitoring station.
Command Menu/Dialer Config/Account
Info
4. Account# 2 Identification
654321->Default
Same as Account#1.
Command Menu/Dialer Config/Account
Info
5.Account# 2 Telephone Number
[ 101 ]->Default
Same as Account#1.
Command Menu/Dialer Config/Account
Info
6.Account# 2 Reporting Format
[X] Contact ID-Def
[ ] SIA 300 Baud
[ ] SIA 110 Baud
Same as Account#1.
Note: Refer to How to Use the Keypad to Program the FA-300 on page 39 for detailed
instructions on making menu selections.
Account#1 Telnum:
_
ACCNT#1 Format:
[X] Contact ID
Account#2 ID:
_
Account#2 Telnum:
_
ACCNT#2 Format:
[X] Contact ID