Specifications

FA-1000 Installation and Operation Manual
5
FA-1000 Fire Alarm Control Panel Kits
For any other sizes, etc., components are ordered separately.
FA-1000 Accessories
Maximum Number of Circuit Adder Modules that may be Installed
The maximum number of circuit adder modules that may be physically installed in a system is outlined in the table
below.
The "S" Version Chassis have slide switches instead of DIP switches for disconnects. The maximum number of
each circuit adder module type is outlined in the following table.
Model Description
FA-1008KA
Expandable kit for the Canadian market. Eight Class B (or four Class A) initiating and four
(Class A or B) indicating circuits, Expandable to 24 circuits, six amp power supply (MCC-1024-
6Main Chassis in a BB-1024 enclosure).
FA-1008KUA
Expandable kit for the U.S.A. market. Eight Class B (or four Class A) initiating and four (Class
A or B) indicating circuits. Expandable to 24 circuits, six amp power supply (MCC-1024-6 main
chassis in a BB-1024R enclosure).
Model Description
MP-300
End-of-line Resistor Plate
MP-300R
End-of-line Resistor Plate, red
MP-300S
End-of-line Resistor Plate, stainless steel finish
Main Chassis Type Number of Adders
MCC-1024-6(S) or MCC-1024-12(S) Two circuit adder modules of any type.
MCC-1024-6(S) or MCC-1024-12(S) and ECH-1048 Eight circuit adder modules of any type.
Module Description Maximum
Total per
System
DM-1008A
Eight detection circuit modules (total of 64 initiating circuits
in a system).
764
SGM-1004A
Four signal circuit modules (total of 24 initiating circuits in
a system).
3 16
RM-1008A
Eight relay circuit modules (total of 32 relay circuits in a
system).
432
Note: Any FA-1000 System may have a PR-300 or UDACT-300A and up to eight (8) Remote Multiplex
Annunciators externally. As good practice, it is recommended that circuit adder modules be installed in
the order of detection modules, followed by signal modules, followed by relay modules.
Note: All systems can carry a maximum of eight adder modules in the combinations permitted above.