Operator`s manual

FA-265 Installation and Operator’s Manual
34
8.5 Silence Inhibit and Walk Test Programming (Section 3)
Please see “Silence Inhibit and Walk Test Programming - Section 3 (‘Battery’ LED on steady)” on page 28.
* = Factory default
8.6 Waterflow Programming (Section 4)
Please see “Waterflow Programming - Section 4 (‘Ground Fault’ LED on steady)” on page 28.
* = Factory default
8.7 50/60Hz Option (Section 5)
* = Factory default
ZONE
ALARM
LED On
Programming Section
Settings
1 Signal Silence Inhibit Timer
Enabled
 *Disabled 
2 One Man Walk Test
*Audible
 Silent 
ZONE
ALARM
LED On
Programming Section
Settings
1 Silencing of Waterflow Alarms
*Enabled
 Disabled 
ZONE
ALARM LED
On
Programming Section
Settings
1 AC power 50Hz or 60Hz
*60Hz
 50Hz 