Operator`s manual

FA-265 Installation and Operator’s Manual
4
2.2 Optional Accessories
Model
Number
Name Description
RM-263 Relay module
Provides 3 relays that are jumper
programmable to activate on common ‘alarm’,
‘supervisory’ or ‘trouble’. Mounts inside the
enclosure and plugs into the main board.
UDACT-286 Dual line dialer
Communicates all alarms, supervisory and
trouble conditions to a Central Station using
Contact ID, SIA or 10/20 BPS communication
formats. Programmable using the MR-2844
handheld programmer.
Mounts inside the enclosure and connects to
the main panel using a supplied 4-wire cable
with connector.
MR-2844 Programmer
Handheld programmer for the UDACT-286
DACT.
RTI-265
Remote trouble
indicator.
Single gang plate complete with common
trouble buzzer, trouble visual indicator, ‘AC on’
visual indicator and a trouble silence / lamp test
switch. Mounts remotely to a single gang
electrical box and is connected to the main
panel via the 4-wire ‘secur-bus’.
RAM-265
Remote trouble
indicator and alarm
indicator
Two gang plate complete with common trouble
buzzer, trouble visual indicator, ‘AC on’ visual
indicator and a trouble silence / lamp test
switch and5 red zone alarm visual indicators
and 5 yellow zone supervisory indictors.
Mounts to a standard 2 gang electrical box and
is connected to the panel via the 4-wire ‘secur-
bus’.