Instructions

NOT TO BE USED FOR INSTALLATION PURPOSES.
THIS INFORMATION IS FOR MARKETING PURPOSES ONLY AND
NOT INTENDED TO DESCRIBE THE PRODUCTS TECHNICALLY.
BEAM200 and BEAM200S Specications
CAT. 5926
Page 2 of 3
Operational Specifications
Protection Range 16 ft to 328 ft (5 m to 100 m)
Adjustment Angle
±10 Degrees horizontal & vertical
(The optics move independent of the unit)
Sensitivity Levels
Level 1 – 25%
Level 2 – 30%
Level 3 – 40%
Level 4 – 50%
Acclimate™ Level 1 – 30 to 50%
Acclimate Level 2 – 40 to 50%
Fault Condition
(Trouble)
96% or more obscuration blockage
In alignment mode
Improper initial alignment
Self-compensation limit reached
Alignment Aid
Optical gunsight
Integral signal strength indication
2 digit display
Alarm Indicator Local red LED and remote alarm
Trouble Indicator Local yellow LED and remote trouble
Normal Indicator Local flashing green LED
Test/Reset
Features
Integral Sensitivity Test Filter (BEAM200S only, requires additional external power supply)
Sensitivity filter (Incremental scale on reflector)
Local test switch
Local reset switch
Remote test and reset switch (Compatible with RTS151 and RTS151KEY test station)
Smoke Detector
Spacing
On smooth ceilings, 30 to 60 feet between projected beams and not more than one-half that spacing
between a projected beam and a sidewall. Other spacing may be used depending on ceiling height,
airflow characteristics, and response requirements. See NFPA 72 and CAN/ULC S524.
Environmental Specifications
Temperature –22°F to 131°F (–30°C to 55°C)
Humidity 10 to 93% RH Noncondensing
Electrical Specifications
Voltage 15 to 32 VDC
Avg. Standby
Current (24VDC)
2 mA Max
Avg. Current
During Testing
500 mA Max
Alarm Current
(24VDC)
8.5 mA Max
Fault Current
(24VDC)
4.5 mA Max
Alignment Mode
Current (24VDC)
20 mA Max
Mechanical Specifications
Detector
Dimensions
10 in H × 7.5 in W × 3.3 in D
(254 mm H × 191 mm W × 84 mm D)
Reflector
Dimensions
(16′ to 230′)
7.9 in × 9.1 in (200 mm × 230 mm)
Reflector
Dimensions
(beyond 230′)
15.7 in × 18.1 in (400 mm × 460 mm)
Electrical Specifications (BEAMHK)
Voltage 15 to 32 V
Current 92 mA at 32 V
Power
Consumption
1.6 W at 24 V; 3 W at 32 V
Electrical Specifications (BEAMHKR)
Voltage 15 to 32 V
Current 450 mA Max at 32 V (per reflector)
Power
Consumption
7.7 W at 24 V; 15 W at 32 V
(per reflector)
firealarmresources.com