User`s guide

TAS-2000 ADC System User’s Guide
19
Editing Records
To edit a record, you must be in Programming Mode. Refer to Entering Programming Mode on page 2 for
instructions
Step 1: Enter Edit Record mode
1. Press (scroll up) or (scroll down).
2. Press when the arrow is pointed beside
“Edit Record”. The display enters Edit Record
mode.
Step 2: Select Record
1. Press (scroll up) or (scroll down) to
find the record you want to change.
2. Press to enter the record.
Step 3: Enter resident’s name
• If you want to change the resident’s name, enter it
now. (see page 16 for instructions). The name may
be up to 15 characters long. Press to save and
continue.
• If you do not want to change the resident’s name,
press to continue.
Step 4: Enter Dial Code
• If you want to change the dial code, enter a code
that is between 1 to 4 digits long. Press to save
and continue.
• If you do not want to change the dial code,
press to continue.
Step 5: Enter Telephone Number
• If you want to change the telephone number, enter
the number. Press twice to save and continue.
• If you do not want to change the telephone number,
press twice to continue.
Step 6: Enter Elevator Code
• If elevator control is not being used, press to
continue.
• If elevator control is being used, please contact your
technician for assistance.
Add New Record
>Edit Record
0
1000 >John Doe
1001 Sam Spade
Enter Name
[ _ _ _ _ _ _ _ _ _ ]
Enter Dial Code
[ _ _ _ _ ]
Enter Telephone No.
[______________]
Enter Elevator Code
[ _ _ ]