User`s guide

Programming

To add another record,

1. Press to scroll one step up.

2. Press . This will bring you back into the “Add new record” mode. Repeat steps 1 through 7.

Step 6: Enter Elevator ID

• If elevator ID is not being used, press to save

and continue.

• If elevator ID is being used, please contact your

technician for assistance.

Step 7: Enter Keyless Code

• If keyless codes are being used, enter the 4-digit

code. Press to save and continue.

• If keyless codes are not being used, press to

save and continue.

Enter Elevator ID

[ _ _ ]

Enter Keyless Code

[ _ _ _ _ ]