User`s guide

Programming

Editing Records

To edit a record, you must be in Programming Mode. Refer to Entering Programming Mode on page 2 for

instructions

Step 1: Enter Edit Record mode

1. Press (scroll up) or (scroll down).

2. Press when the arrow is pointed beside

“Edit Record”. The display enters Edit Record

mode.

Step 2: Select record

1. Press (scroll up) or (scroll down) to

find the record you want to change.

2. Press when the arrow is beside the record

you want to change. The display now enters the

record. Note: Records are listed according to

resident dial code.

Step 3: Enter Dial Code

• If you want to change the dial code, enter a code

that is between 1 to 4 digits long. Press to save

and continue.

• If you do not want to change the dial code,

press to continue.

Step 4: Enter Telephone Number

• If you want to change the telephone number, enter

the number. Press twice to save and continue.

• If you do not want to change the telephone number,

press twice to continue.

Step 5: Enter Elevator Code

• If elevator control is not being used, press to

continue.

• If elevator control is being used, please contact your

technician for assistance.

Add New Record

>Edit Record

1000 >

1001

Enter Dial Code

[ _ _ _ _ ]

Enter Telephone No.

[______________]

Enter Elevator Code

[ _ _ ]