User`s guide

Programming
6
Programming
Adding New Records
To add a new record, you must be in Programming Mode. Refer to Entering Programming Mode on page 2 for
instructions.
Step 1: Enter Add New Record mode
Press to add a new record. The display enters Add
New Record mode.
Step 2: Enter Dial Code
1. Enter the resident’s dial (door) code. The code
may be between 1 to 4 digits long.
2. Press to save and continue.
Step 3: Enter Telephone Number
1. Enter the resident’s telephone number (and
area code if applicable).
2. Press twice to save and continue.
Step 4: Enter Elevator Code
• If elevator control is not being used, press to
save and continue.
• If elevator control is being used, please contact your
technician for assistance.
>Add New Record
Edit Record
0
Enter Dial Code
[ _ _ _ _ ]
Enter Telephone No.
[_____________]
Enter Elevator Code
[ _ _ ]