Specifications

49
Configuration
the system will ask you to re-enter passcode. The system will be exhausted after three retries
and will then take you back to the Normal message display.
When the user presses “MENU” and enters the password, they should enter the password of
the level intended. If the user is in a lower level of access, attempts to operate functions
requiring a higher level of access will be refused. The three levels of access are defined in
Table 6.
10.3 How to Use the Keypad to Program the FR-320
1. Press (Menu button). You will be prompted to enter your password.
2. Enter your password, then press (Enter button) to continue.
3. Select a Command Menu option by pressing . The corresponding submenu will
display.
4. Use the up and down arrow buttons to scroll through the submenu.
5. Press to select a submenu option.
6. Use the left or right arrow buttons to select/unselect an option (selected = “X
”). Use the
up and down arrows to scroll through the different menu options. When entering
numerical data, use the up and down arrows to increase or decrease the number.
7. Once you have made the correct selection, press to confirm the change. The
display will return to the submenu screen.
8. Press (Cancel button) to return to the previous menu.
Table 6 Access Levels
Access Level Description
Level 0 - Command The default password is for this level “1111” without quotes. In this level the
user can only perform regular testing and operation.
Level 1 - Configuration The default password is for this level “2222” without quotes. User can
change configuration and have access to command level.
Level 2 - Factory Currently not used.
Enter passcode:
_
M
X