Owner Manual

30
CLEANING AND MAINTENANCE
Dust Bin Sensors
Over a long period time of use, dust and debris will accumulate around the intake
valve blocking the dust bin’s sensors and causing the dust bin full LED indicator to
light up even when it is empty. When this happens please check and clean around the
intake valve.
1. Turn off LOOP.
2. Remove the dust bin (refer to Page 26).
3. Use a soft-bristle brush to lightly clean away any dust build up.
Anti-Cliff Sensors
Over a long period time of use, dust and debris will accumulate around the anti-cliff
sensors causing LOOP’s control panel LED “ ” to flash red and stop operating.
When this happens please check and clean around the anti-cliff sensors.
1. Turn off LOOP.
2. Use a thin brush or q-tip to clean away any dust build up around all 3 sensors.
Dust Bin Sensors
Anti-Cliff Sensors