Owner Manual

29
CLEANING AND MAINTENANCE
After repeated use, dirt and dust can accumulate around the intake of LOOP and
the work efficiency can be reduced. To ensure the best efficiency and constant
airflow, the intake should be cleaned periodically.
1. After being used for a long period of time, the brushes need to be replaced for
maximum efficiency.
2. Turn off the power, place the bottom of the cleaner upward on a flat surface.
Hold two opposite sides of the brush (see diagram below), and evenly pull
upward to remove the brush.
3. After removing the brushes from the unit, they can be rinsed with water to
clean. If the brushes become bent or wrinkled after continuous use, soak
them in hot water to return to their original shape. Install the brushes back
after cleaning.
Intake Valve
Side Brushes
Intake Valve
PULL UP