Owner Manual

24
GENERAL OPERATION
Understanding LOOP’s Displays
Display on Screen Possible Cause Solution
The wheel is stuck.
Remove the unit from the
obstacles, and re-start the
power switch.
The top cover or dust bin is not
installed properly.
Install the top cover and dust bin
properly. The unit will detect the
error and fix automatically.
The bumper is stuck.
Remove the unit from obstacles.
The unit will detect the error and
fix automatically.
The unit was lifted up from the
floor or the color of the floor is
too dark.
Put the unit back on the floor.
Please refer to page 17 to adjust
the window of anti-cliff sensor.
The unit will detect the error and
fix automatically.
The battery is not installed
properly. Charging error.
(Power switch is off).
To install the battery properly,
please refer to page 14 for
battery installation, and re-start
the power switch.
Table A: Red LED flashing on screen.
Table B: Buzz
Red LED
Flashing
Buzz Indicator
Beep 1 Time Normal
Beep 2 Times Invalid
Beep 3 Times Error