Owner Manual

22
Manual Work
When LED Indicator light is on -
Check:
Dust bin is full.
Intake Valve is stuck with dirt.
Inside and outside of Intake Valve area needs to be cleaned.
1. Press ( ) power key to start.
2. After work is completed, the unit will sound warning buzz. The unit will stop
or return to docking station for charging.
3. During working time:
(1) The unit will stop if you press and hold ( ) power key for more than 0.5
seconds on the control panel or press the ( ) stop key on the remote
control.
(2) Press and hold the “ “ for 3 seconds, the unit will enter docking mode,
LED power indicator “ ” will turn red.
(3) If “ ” stays solid red, it indicates the unit is low on battery and will
sound a buzz warning. The unit will stop or return to docking station for
charging depending on settings.
4. When the unit is connected to the power adapter or docked at the docking
station:
(1) Charging: The ( ) power LED will flash green when charging.
Battery full: The ( ) power LED will be solid green.
(2) Use the setting keys and/or remote control to adjust/change settings.
(3) On the dock station:
- Press ( ) more than 3 seconds (you will hear a beep sound) to
activate the unit to begin cleaning.
- Use the “ ” key on the remote control to activate the unit to begin
cleaning out of the dock station.
- Or use the ( ) on the remote control to activate the unit out of the
dock station and use ( ) Auto key to begin cleaning.
- If the unit is accidentally kicked or moved while docked on the docking
station, it will try to find its way back to the docking station but will
stop if it is not properly set. Please make sure to always have the
docking station placed properly.
Basic Operation
GENERAL OPERATION