Owner Manual

19
Remote Control
Remove insulation sheet before using remote control.
1. “CR2025 3V“ battery required.
2. After selecting a command, the unit will start after 3 seconds.
3. When the unit is docked on the docking station charging or in stand-by mode,
press the “ ” button for the unit to start cleaning.
4. While LOOP is in operation, press any key on remote control to change its
settings or action immediately.
5. Function of buttons: See table on the next page.
IR Transmitter
Forward
Turn Right
Stop / Start
Backward
Along the Wall
Random
Mode Selection Button
Fan Strength Selection
Button
Time Selection Button
Max Work Time
Docking
Auto
Spiral
Turn Left
30 Min45 Min60 Min
GENERAL OPERATION