Owner Manual

17
Adjustment of Anti-Cliff Sensors
INSTALLATION GUIDE
There are 3 “Anti-Cliff” sensors at the bottom of LOOP to prevent the unit from
falling down stairs. If the distance between the stair and the ground is shorter
than usual, please adjust all windows of “Anti-cliff” sensors to “ ”, “ ”, “ ”, or “ ”
position to prevent the cleaner from falling down stairs.
Please test before the unit starts to clean.
ATTENTION: If the color of the floor is dark (e.g. black), it means that reflectivity of
the floor is bad, at this time, you have to open the window to a larger scale.
Please refer to the criteria of adjustment (see below) for adjusting the sensor
windows.
The Criteria of Adjustment
Darker Floor
Lighter Floor
Bigger Drop
Shorter Drop