User manual

5-32 Vertigo XG Configuration Guide
Dashboard - Vertigo XG’s Local Configuration Software
RESOLUTION - CONTINUED • NTSC_WIDE: Sets the rendering resolution to NTSC-Wide
format (800 x 486)
• PAL: Sets the rendering resolution to PAL format
(720 x 576)
• PAL_W
IDE: Sets the rendering resolution to PAL-Wide
format (800 x 576)
• 720
P60: Sets the rendering resolution to 720p60 format
(1280 x 720)
• 720
P60M: Sets the rendering resolution to 720p60M format
(1280 x 720)
• 1080
I25: Sets the rendering resolution to 1080i25 format
(1920 x 1080)
• 1080
I30M: Sets the rendering resolution to 1080i30M
format (1920 x 1080)
• 1080
I30:Sets the rendering resolution to 1080i30 format
(1920 x 1080)
• 1080
I24M: Sets the rendering resolution to 1080i24m
format (1920 x 1080)
• 1080
P24:Sets the rendering resolution to 1080p24 format
(1920 x 1080)
• 1080
P25:Sets the rendering resolution to 1080p25 format
(1920 x 1080)
• 1080
P30M: Sets the rendering resolution to 1080p30m
format (1920 x 1080)
• 1080
P30:Sets the rendering resolution to 1080p30 format
(1920 x 1080)
B
IT COUNT Specifies the bit depth of the genlock signal. Choose either 8 (default) or 10
from the drop-down list.
S
TATUS & REFRESH
button
Identifies the current state of the Genlock signal source that is selected in
the S
OURCE parameter.
• L
OCKED: The connection is established and the on-board Genlock is
sending a clocking signal to the Genlock source specified in the Source
parameter.
• F
REE RUNNING: No signal is coming in on the selected Genlock source,
or the specified signal formats are not the same. For example, if the
resolution setting on the Genlock page does not match the resolution
formats specified on the Resolution page.
• R
ELOCKING: In the process of locking. Note that if continuously in this
state, the Genlock signal might not be stable and it needs to be
checked.