User manual

Vertigo XG Configuration Guide 5-21

Dashboard - Vertigo XG’s Local Configuration Software

Resolution page

The Resolution page (figure 5-9) provides access to the device parameters that set the

input, rendering, and output resolution of the video data.

Figure 5-9. The Resolution tab and page on the Dashboard window

NPUT RESOLUTION This parameter is only available to Vertigo hardware devices (not the

software CG).

The Input Resolution parameter allows you to select the input resolution of

the video data prior to processing by Vertigo device. Select a resolution

format from the drop-down list of preset formats that are compatible with the

rendering resolution.

• NTSC: Sets the rendering resolution to NTSC format

(720 x 486) Rate: 29.97

• NTSC_W

IDE: Sets the rendering resolution to

NTSC-Wide format (800 x 486) Rate: 29.97

• PAL: Sets the rendering resolution to PAL format

(720 x 576) Rate: 25

• PAL_W

IDE: Sets the rendering resolution to PAL-Wide

format (800 x 576) Rate: 25

• 720

P60: Sets the rendering resolution to 720p60 format

(1280 x 720) Rate: 60

• 720

P60M: Sets the rendering resolution to 720p60M

format (1280 x 720) Rate: 59.97

• 1080

I25: Sets the rendering resolution to 1080i25 format

(1920 x 1080) Rate: 25

• 1080

I30M: Sets the rendering resolution to 1080i30M

format (1920 x 1080) Rate: 29.97

• 1080

I30:Sets the rendering resolution to 1080i30 format

(1920 x 1080) Rate: 30

• 1080

I24M: Sets the rendering resolution to 1080i24m

format (1920 x 1080) Rate: 23.98