User manual

Vertigo XG Configuration Guide 5-19
Dashboard - Vertigo XG’s Local Configuration Software
General page
Selecting the GENERAL tab in Advanced Settings mode, opens the General settings page
(figure 5-8
). This configuration page provides you access to a series of miscellaneous
device parameters, including storage settings and communication settings between the
Vertigo devices, Xplay, and/or the broadcast monitor.
Figure 5-8. The General settings tab and page on the Dashboard Window
A
SSETS PUBLISH PATH: Identifies the directory location where assets are stored on the
Vertigo device, or on the host computer (software CG). The default directory
paths for the Vertigo hardware devices is F\:Scene\, while the default
directory path for the Vertigo Software CG is C\:Scene\.
Assets are automatically placed within appropriate subfolders by the publish
agent. For example, images are stored in the Image subfolder.
TCP/IP C
OMMAND PORTS: Sets the communications port used by the Vertigo devices
and Vertigo software CG for command and control between applications
(i.e. Vertigo XG and Xplay). This port must be open and 2-way unblocked on
the Vertigo device’s subnet.
C
EL ANIMATIONS CACHE SIZE: Sets the number of cel animations that are cached in system
memory after they are no longer referenced by a loaded scene.
The default is 250.
Increasing the cache size setting will unnecessarily slow down performance
and occupy memory space.