User manual

Vertigo XG Configuration Guide 5-17
Dashboard - Vertigo XG’s Local Configuration Software
Device Settings tabs and configuration pages
Selecting ADVANCED from the SETTINGS MODE drop-down list produces a series of eight (8) tabs
that display thematic pages of parameters and settings that allow you to configure the selected
device (figure 5-6
).
Figure 5-6. Selecting the Advanced Settings Mode exposes the device’s configuration pages
NOTE
The seventh page is dynamic, meaning that when the selected device is a hardware XG,
the seventh tab is labelled H
ARDWARE SETTINGS; however when the selected device is a
software CG the seventh tab is labelled AUDIO & VIDEO.
The following topics describes each of the parameters and settings on the device’s
configuration pages:
• “Device settings buttons” on page 5-18
• “General page” on page 5-19
• “Resolution page” on page 5-21
• “Live Window page” on page 5-23
• “Clips page” on page 5-25
• “3D Engine page” on page 5-27
• “Logging page” on page 5-29
• “Hardware Settings > Genlock page” on page 5-31
• “Hardware Settings > Video page” on page 5-34
• “Hardware Settings > Audio page” on page 5-36
• “Hardware Settings > Ancillary page” on page 5-38
• “Hardware Settings > Watch Dog page” on page 5-41
• “Licensing page” on page 5-42