User manual

Vertigo XG Configuration Guide 5-15
Dashboard - Vertigo XG’s Local Configuration Software
Device Profile page
The Device Profile page appears below Dashboard’s Device List when the SETTINGS MODE
is set to S
IMPLE and a device is selected from the Device List (figure 5-5). The Device Profile
page provides a brief summary of some of the device and system’s settings that may be
relevant when operating or troubleshooting the system.
Figure 5-5. Dashboard’s Device Profile page
The following table describes each of the fields that are displayed on the Device Profile
page for Vertigo devices:
G
ENERAL • DEVICE NAME: The name given by the last connecting application. Such as
Xplay or Xstudio.
• D
EVICE TYPE: Displays the Vertigo device type, either HARDWARE XG or
S
OFTWARE CG.
V
ERSION • APPLICATION VERSION: Displays the software version of Vertigo device.
• DSX.
UTILS VERSION: Displays the version of the driver used inside the Vertigo
device.
G
RAPHICS • CARD TYPE: Identifies the type of graphics card used by the Vertigo device.
This information is useful when troubleshooting the Vertigo device as some
functionality might depend upon the type of graphics card used.
• M
EMORY USE: Displays the total amount of memory being used by the
graphics card, including host and onboard.
P
ORTS • APPLICATION PORT: Displays the communication port used between the
Dashboard application and the selected Vertigo device.
• C
OMMAND PORT: The communications port used by the Vertigo device for
command and control by applications, such as Xstudio or Xplay. To edit this
setting, select the Display Settings Tab and edit the C
OMMAND PORT field.