User manual

4-12 Vertigo XG Configuration Guide
Vertigo XG Portal - Vertigo XG’s Remote Configuration Tool
Specifying the Vertigo XG device’s Date & Time settings
The Vertigo XG Portal allows you to conveniently change the Vertigo XG device’s date and
time settings.
NOTE
Any change to the TIME setting will not take effect if a timecode card is installed.
To change the Vertigo XG device’s Date and/or Time settings:
1. Log into the Vertigo XG’s Portal (see page 4-2
).
2. Select the SETUP>TIME SETUP command.
The Portal’s T
IME SETUP page appears and displays the following fields and
information: D
ATE, TIME, and CURRENT TIME (figure 4-14).
Figure 4-14. The Vertigo XG Portal’s Time Setup page
3. Use the drop-down lists in the D
ATE and TIME fields to select the new date and time
values.
4. Click the A
PPLY button.