User manual

Vertigo XG Configuration Guide 4-7
Vertigo XG Portal - Vertigo XG’s Remote Configuration Tool
Restarting the Vertigo XG device remotely
The Vertigo XG Portal allows you to restart an actively running Vertigo XG device from a
remote workstation using the R
ESTART SYSTEM command in the MAINTENANCE menu.
NOTE
The Vertigo XG device must be operating for the Vertigo XG Portal to be available.
Therefore, once the Vertigo XG device is shutdown, you can no longer use the Vertigo XG
Portal to configure or restart the device.
To restart the Vertigo XG device using the Vertigo XG Portal:
1. Log into the Vertigo XG’s Portal (see page 4-2
).
2. Select the M
AINTENANCE>SYSTEM RESTART command.
The Portal’s S
YSTEM RESTART page appears (figure 4-7).
Figure 4-7. The Vertigo XG Portal’s System Restart page
3. Click the RESTART button to restart down the Vertigo XG device.
A window appears asking you to confirm that you want to restart the device (figure 4-8).
Figure 4-8. Confirm whether or not you want to restart the device
4. Click OK to restart the device.
The Portal immediately returns to the Intuition XG Portal’s L
OGIN page.
Give the machine sufficient time to complete the reboot process and then log back into
the system (see page 4-2
).