User manual

4-6 Vertigo XG Configuration Guide
Vertigo XG Portal - Vertigo XG’s Remote Configuration Tool
Remotely shutting down the Vertigo XG device
The Vertigo XG Portal allows you to shutdown of the Vertigo XG device from a remote
workstation using the M
AINTENANCE menu’s SHUTDOWN SYSTEM command.
To shutdown the Vertigo XG device using the Vertigo XG Portal:
1. Log into the Vertigo XG’s Portal (see page 4-2
).
2. Select the M
AINTENANCE>SYSTEM SHUTDOWN command.
The Portal’s S
YSTEM SHUTDOWN page appears (figure 4-5).
Figure 4-5. The Vertigo XG Portal’s System Shutdown page
3. Click the SHUTDOWN button to shut down the Vertigo XG device.
A window appears asking you to confirm that you want to shut down the device (figure 4-6).
Figure 4-6. Confirm whether or not you want to shut down the device
4. Click OK to shut down the device, or click C
ANCEL to keep the device running.
NOTE
The Vertigo XG device must be running for the Vertigo XG Portal to be available. Therefore,
once the Vertigo XG device is shutdown, you can no longer use the Vertigo XG Portal to
configure or restart the device.