User manual

4-4 Vertigo XG Configuration Guide
Vertigo XG Portal - Vertigo XG’s Remote Configuration Tool
Overview of the Vertigo XG Portal’s menu commands
With the exception of the LOGIN page, the VERTIGO XG PORTAL always features a menu bar
in the top banner that allows you to navigate throughout the application (figure 4-4
).
Figure 4-4. Vertigo XG Portal’s menu bar
The five(5) menus at the top of the Vertigo XG Portal provide access to commands and/or
actions that allow you to view information about the device, configure settings, and/or
perform some basic control actions. The following list identifies the function of each of the
menus and their associated commands:
Home Returns the Vertigo XG Portal immediately to its home page, which
displays the following information:
• H
OST NAME: The host name that is currently assigned to the
Vertigo XG device. To change to host name, select
SETUP>HOSTNAME SETUP from the menu bar.
• IP ADDRESS: The IP Address that is currently assigned to the Vertigo
XG device. To change to IP Address, select S
ETUP>NETWORK SETUP
from the menu bar (see page 4-9
for more information).
Maintenance The M
AINTENANCE menu features the following commands that allow you
to perform a soft shutdown or restart the Vertigo XG device remotely.
• S
YSTEM RESTART: Allows you to restart the Vertigo XG remotely from
a workstation. See page 4-7
for more information.
• SYSTEM SHUTDOWN: Allows you to shutdown the Vertigo XG remotely
from a workstation. See page 4-6
for more information.
Diagnostics The D
IAGNOSTICS menu features the following commands:
• R
UNNING PROCESSES: Allows you to view a listing of the processes
currently running on the Vertigo XG device. See page 4-8
for more
information.
• D
IAGNOSTIC ZIP FILE: Gathers log files, configuration files and registry
settings that are related to the device. This data is a zipped into a file,
which can be saved or viewed immediately.