User manual

4-2 Vertigo XG Configuration Guide
Vertigo XG Portal - Vertigo XG’s Remote Configuration Tool
Accessing and logging into the Vertigo XG Portal
Once the Vertigo XG device is running and is properly connected to the LAN, you can
access the Vertigo XG Portal from any client workstation that is connected to the network
using a standard graphical web browser, like Internet Explorer.
NOTE
As a prerequisite to using the Vertigo XG Portal, you must know that Vertigo XG devices IP
address. Contact your network administrator for the device’s IP address, or take note of it
from the Vertigo XG Control Panel (see page 3-3).
To access and log into the Vertigo XG Portal:
1. Open a web browser (e.g. Internet Explorer) on a client workstation that is connected
to the same local network as the Vertigo XG device.
2. Type the IP address or hostname of the Vertigo XG device into the address bar of the
web browser (e.g. http://10.0.4.245) and press E
NTER.
The Vertigo XG Portal’s L
OGIN page appears (figure 4-2).
Figure 4-2. The Vertigo XG Portal’s Login page
NOTE
If the Vertigo XG Portal’s LOGIN page does not appear, verify the IP address in the web
browser’s address bar for typographical errors. Other reasons that it might not appear are
that the Vertigo XG device is not running, that it is not properly connected to the network,
or the network is down.
3. Log into the application by typing vertigo in the P
ASSWORD text box and clicking the
L
OGIN button.
The V
ERTIGO XG PORTAL Home page appears (figure 4-3).
Figure 4-3. The Vertigo XG Portal’s Home page