User manual

3-14 Vertigo XG Configuration Guide
Vertigo XG’s Desktop Applications & Tools
Service Control
In most cases, the EXMS service is set to automatically launch and
run in the background when the Vertigo XG is powered up.
At times, the service may need to be stopped and restarted, either
manually or as the result of a failure in the system. Therefore, the
EXMS Control Panel’s Service Control page provides you with
buttons and settings for stopping and restarting the EXMS service.
Publishing
The EXMS facilitates the publishing of assets from a central or stand-
alone Xmedia Server to the device using server propagation
operations (XMS > EXMS > XPublishAgent > device).
The Publishing page contains the following parameters:
• C
ENTRAL XMS IP OVERRIDE: The IP address of the central or
stand-alone Xmedia Server device that the EXMS will be
receiving the assets from.
• I
NSTA-PUBLISH DEVICE ENABLE: This setting is enabled by default
on Vertigo XG devices to ensure the publishing of assets from
the central XMS to the Vertigo XG device.
• R
ELOAD PUBLISH QUEUE ON STARTUP: This setting allows the
Publish Request list to be populated with the current publish
queue items when the EXMS service is started.
OxSox
The O
XSOX SERVER SETTINGS are enabled by default on all Vertigo
XG devices, which makes the Oxsox protocol available for legacy
Oxtel media browsers to browse/push assets (IMM or PresStation).
• E
NABLE OXSOX: Enabled by default on Vertigo XG devices.
• I
NCOMING CONNECTIONS PORT: The port (5001) that the EXMS
dedicates for communicating with the OxSox softwares.
• E
NABLE ALL CATEGORIES: Enabling all categories allows the
EXMS to reflect all of the assets in its database regardless of
category as a flat list, thereby emulating the Vertigo and
ImageStore. When disabled, the EXMS only reflects the assets
stored in the asset type root categories.