User manual

Vertigo XG Configuration Guide 2-3
Overview of the Vertigo XG’s Hardware
LAN1 A flashing green LAN1 LED indicates network activity on LAN2.
HDD A
CTIVITY This flashing amber LED indicates IDE channel activity.
P
OWER INDICATOR (LED) Indicates that power is being supplied to the system’s power supply units.
This green LED should normally be illuminated when the system is in
operation.
MUTE (ALARM RESET) Press the Mute button to silence the buzzer alarm, which is activated by a
signal received from the SCSI drive backplane. After silencing the alarm,
you should then press the button again to reactivate the alarm function.
R
ESET The Reset button reboots the system.
P
OWER BUTTON This is the main power button, which is used to apply or turn off the main
system power. Turning off this button removes the main power, but keeps
standby power supplied to the system.