User manual

Vertigo XG Configuration Guide 1-11
Introduction
Supported clip formats:
• MPEG (I-Frame)
• Extension: (.mpg, .mpeg)
• Codec: MPEG2 (I-Frame)
• Max. Bit Rate: 50 Mbps
• Audio Codec: MPEG Audio Layer 2/Layer 3/AAC (16bit, 48Khz)
• Audio Tracks: Single
• Audio Channels: Stereo
• MXF Wrapped MPEG (I-Frame)
• Extension: (.mxf)
• Codec: MPEG2 (I-Frame) (SD D10/IMX)
• Max. Bit Rate: 50 Mbps
• Audio Codec: PCM (Uncompressed 16/20/24bit or AES3)
• Audio Tracks: Single
• Audio Channels: Max 8
• MXF Wrapped DV25/DVCPro/DVCPro50/DVCPRO HD
• Extension: (.mxf)
• Codec: DV25/DVCPro/DVCPro50/DVCPRO HD
• Bit Rate: Depends on Codec
• Audio Codec: PCM (Uncompressed 16/20/24bit or AES3)
• Audio Tracks: Single
• Audio Channels: Max 8
Audio file formats
The Vertigo XG passes embedded audio channels through with the video, while discrete
audio is only available through the addition of the Vx-Audio-e option (page 2-11
). In addition,
any audio processing (e.g. adding voice-overs, sounds, audio ducks, etc.) also requires the
Vx-Audio-e option.
The Vertigo XG supports the following audio formats:
• Wave (.wav)
•MP3
• AAC
•AIFF