User manual

Vertigo XG Configuration Guide 1-7

Introduction

Vertigo XG’s licensing requirements

For the Vertigo XG device to operate in its full capacity, the following application licenses

must be installed and activated locally on the Vertigo XG’s embedded Xmedia Server:

You can verify that the appropriate licenses are installed and activated on the Vertigo XG

using either the L

ICENSE TAB on the Embedded Xmedia Server’s Control Panel or Xplay’s

ICENSE MANAGER (figure 1-5).

Figure 1-5. A list of the application licenses currently installed on the Vertigo XG

NOTE

Once the required licenses are installed on the Embedded Xmedia Server, you must also verify

that the licensing information can be properly communicated to the Vertigo XG device. This

communication is performed by the settings on Dashboard’s LICENSING page (see page 5-42).

XGHD 4.5 The Vertigo XG requires an HD application license to output at HD resolutions. An

HD application license allows the Vertigo XG to also output at SD resolutions.

PLAY 4.5 The Vertigo XG uses a local copy of the Vertigo Suite’s Xplay application as a

media player. This application must have a valid software license installed to

operate. See page 3-5

for more information about Xplay.

XMSDEVICE 0.0 An Xmedia Server Device license is associated to each device object in the

system. Therefore, each device added to the Device Manager requires its own

device license.

XGA

UDIO 4.5 The Vertigo XG requires a license to output voice overs and clip audio.

XGCLIP 4.5 The Vertigo XG requires a license for clip playback. See page 2-13 for more

information about the Clip Player.

Xmedia Server Control Panel The License Manager in Xplay