User manual

Vertigo XG Configuration Guide 5-45
Dashboard - Vertigo XG’s Local Configuration Software
SAVE / CANCEL buttons The SAVE button saves the mixing profile matrix, and any changes
that where made to the matrix values or structure, by associating it
with a number in the Profile ID list.
The C
ANCEL button allows you to exit the Audio Mixing Profile dialog
box without saving any of the changes made to the mixing
matrixes/profiles.
A
DD SOURCE command Use the ADD SOURCE command to add an additional source channel
to a predefined mix matrix. The A
DD SOURCE command is accessed
by right-clicking anywhere within the matrix and selecting A
DD
S
OURCE from the command list.
ADD DESTINATION command Use the ADD DESTINATION command to add an additional destination
channel to a predefined mix matrix. The A
DD DESTINATION command
is accessed by right-clicking anywhere within the matrix and selecting
A
DD DESTINATION from the command list.
D
UCK command The DUCK command enables a technique for attenuating the audio
coming in on the “ducked” channel, to make room for another signal
to dominate. For example, the music coming in on a channel will
lower when a voice over is introduced.
Ducking is automatically enable when mixing is enabled (value > 0).
You can also manually set the ducking command when the mixing
value is set to zero (0 indicating no audio mixing to that channel). The
D
UCK command is accessed by right-clicking the destination channel
heading and selecting from the command list. When ducking is
enabled, the destination channel’s heading turns blue.