User manual

Vertigo XG Configuration Guide 5-37
Dashboard - Vertigo XG’s Local Configuration Software
OUTPUT • AES: Specifies that the audio output signal is discrete (AES), rather
than being embedded (SDI) in the video signal.
• E
MBEDDED: Specifies that the audio output signal is embedded in the
video signal (SDI), rather than a discrete (AES) audio signal (separate
from the video signal).
• S
TEREO PAIRS: Specifies the number of stereo pairs to be captured
from the current audio source.
• AV S
YNC: Specifies the number of frames to shift the audio and video
output out of sync. A positive number delays the audio and a negative
number delays the video.
• BITS PER SAMPLE: Specifies the bit depth of the audio signal. The
available values are 0, 16, 20, and 24. The default value is 0. Using a
value of 0 means that the device will automatically choose the bit-depth
based on the output format. For SD, it is 20 and for HD it is 24.
M
IXING PROFILES The following are the default mix profiles used for each type of object, like
clips, .wav file...etc. Type the Profile ID number to assign a mixing profile
from the Audio Mixing Profiles dialog box as the default mixing profile
(see “Audio Mixing Profiles dialog box” on page 5-43
).
•CLIP DEFAULT
•VOICEOVER DEFAULT
•MULTI-TRACK CLIP DEFAULT
•AUDIO INPUT A DEFAULT
•AUDIO INPUT B DEFAULT
• EDIT PROFILES button: Opens the Audio Mixing Profiles dialog box
(see “Audio Mixing Profiles dialog box” on page 5-43
).