Operating instructions

2-18 Vertigo XG Installation & Quick Start Guide
Installation and quick start instructions
Enable the Vertigo XG’s Live window
For installation and troubleshooting purposes, the Vertigo XG is equipped with a preview
window called the Live Window. The Live Window allows you to display a representation of
the output channel’s playout directly on the Vertigo XG’s desktop.
To enable the device channel’s Live Window:
1. If Channel A’s Dashboard is not already open, select the T
OOLS>LAUNCH DASHBOARD
menu command in the Vertigo XG’s Control Panel for Channel A. Then, select the device’s
channel from the Device List.
2. Select A
DVANCED from the Settings Mode drop-down list.
3. When promted, click YES to switch to advance mode.
4. Select the L
IVE WINDOW tab and check the ENABLED box.
5. Click the A
PPLY CHANGES button. When prompted, click YES to apply the changes.
6. When prompted, click YES to perform a restart of the Vertigo XG device.
Once the device has restarted, the Live Window will appear on the Vertigo XG’s
desktop.
NOTE
It is normal that the Live window is appears as double the expected width, since individual
fields are being displayed on a progressive PC output.
Live Window