Operating instructions

2-8 Vertigo XG Installation & Quick Start Guide
Installation and quick start instructions
3. Locate the five rail buttons on each side of the chassis and locate the five
corresponding holes on each of the inner rails.
(*Please note that one end of the hole is larger than the other end of the hole.)
4. Align the larger end of each hole against its corresponding button. Once all aligned,
push the holes toward their corresponding buttons and the rail is placed on the chassis.
5. Once the rail is placed on the chassis, pull the rail forward until the rail buttons lock in
the small ends of the corresponding holes.
6. Secure the rail to the chassis with a Type G screw. Repeat the above steps 2 to 6 to
install the other rail on the other side of the chassis.