Operating instructions

GUIDE TO INSTALLATION AND OPERATION PRELIMINARY

10 | UVP-101i

Figure 3.2 UVP-101i Menu Tree

DISPLAY VALUES NOTES

INP [ANA, SDI]

ICMP FRMT [AUTO, NTSC, PAL, B&W5, B&W6]

SRC [SAT, STUD, VCR]

DECD [SADP, A-3D, A-2D] (SRC = STUD or SAT only)

SETP [-10, ..., -0.1, 0, 0.1, .., 7.5, …, 10] IRE (NTSC only)

PROC Y [-800, …, -1, 0, 1, …, 800]

Cb [-800, …, -1, 0, 1, …, 800]

Cr [-800, …, -1, 0, 1, …, 800]

SAT [-800, …, -1, 0, 1, …, 800]

ALL [-800, …, -1, 0, 1, …, 800]

BLAK [-100, …, -1, 0, 1, …, 100]

HUE [-180, …, -1, 0, 1, …, 180] DEG (NTSC/525 only)

HPOS [-7, …, -0.5, 0, 0.5, …, 7] PIX (Analog input only)

TIMG MODE [4FLD, 2FLD]

Analog NTSC input only

Forced to 2 FLD when no REF IN

FRAM [NOM, +1, +2, +3] FRM (with REF IN) (MODE = 2FLD only)

VERT [0, 1, …, 524] LINE (NTSC/525)

[0, 1, …, 624] LINE (PAL/625)

HORZ [0, 0.04, ..., 63.5] us (NTSC/525)

[0, 0.04, ..., 64.0] us (PAL/625)

FINE [-40, …, -1, 0, 1, …, +40] with REF IN only

ABUS #1 DMUX [OFF, GRP1, GRP2, GRP3, GRP4]

(1) (INP = SDI only)

MUX [OFF, GRP1, GRP2, GRP3, GRP4]

VBIT [MUTE, PASS]

#2 DMUX [OFF, GRP1, GRP2, GRP3, GRP4]

(1) (INP = SDI only)

MUX [OFF, GRP1, GRP2, GRP3, GRP4]

VBIT [MUTE, PASS]

BLNK HANC [PASS, BLNK]

VANC [PASS, BLNK, PROC, DECD, USER] (Analog input)

[PASS, BLNK, PROC, USER] (SDI input)

(continued)

(INP = ANA only)

SEL