Setup guide
Table Of Contents
- Introduction to iControl Edge
- System Requirements
- Installation and Setup
- Key Concepts
- Task 1: Preparing to Install an iControl Edge System
- Task 2: Installing the iControl Application Server
- Task 3: Preparing a PC for Configuring the Application Server
- Task 4: Configuring the Application Server
- Task 5: Installing & Configuring EdgeVision Devices
- Task 6: Installing & Configuring Densité Systems
- Task 7: Installing & Configuring GC-100 Network Adapters
- Task 8: Installing Set-Top Boxes
- Task 9: Installing & Configuring Allégro Systems
- Task 10: Verification & Readiness Check
- Task 11: Managing the iControl Edge Configuration Files
- Task 12: Uploading and Applying iControl Edge Configuration Files
- Key Concepts
- Troubleshooting
- Installing PuTTY
- Using WinSCP
- Contact Us!
Installation and Setup
Devices Worksheet
88
Table 3-3: Devices worksheet contents
Area Column Description
• APPLICATION SERVER
•DENSITE
• ALLEGRO (STREAMER)
•PDU
• CARD (PHYSICAL
PROBE)
•GC100
•GC100IRPORT
• EDGEVISION
• EDGEVISION INPUT
(IR CONTROLLER /
PHYSICAL PROBE /
STREAMER)
• STBTUNER
(IR CONTROLLER)
•DVRTUNER
(IR CONTROLLER)
•VIRTUAL DEVICE
(VIRTUAL PROBE)
•CYCLER
** Two asterisks (**), with no spaces, are positioned in the first column to
indicate rows to be ignored, such as rows containing column headers, or
intended for future use.
1
ID The unique indentifier for the device. This ID is used to reference the device
within and between spreadsheets.
Mandatory.
ENABLE Type
YES to enable a device, NO to disable it for troubleshooting or
maintenance. A disabled device remains defined in the system, but does not
participate in monitoring/control operations. In the corresponding Web
page, alarms associated with a disabled device will appear in black (i.e. their
state will be considered unknown).
TYPE The device type.
Choices are:
•
AAP1741 = AAP-1741 4-Channel Analog Audio Processor
•
ACP1721 = ACP-1721 Digital Audio Control Probe
•
ALLEGRO = Allégro Streaming Encoder/Server
•
AS = Application Server
•
CYCLER = Defines a cycling profile and associated alarm debouncing
parameters
•
DEC1002 = DEC-1002 10-Bit Composite to SDI Decoder
•
DEC1003 = DEC-1003 10-Bit Composite to SDI Decoder with Probing
Option
•
DEC1023 = DEC-1023 12-Bit 3D Composite to SDI Decoder with Probing
•
DENSITE = Densité Housing Frame
•
DVR = Digital Video Recorder
•
DVRTUNER = Set-Top Box model with a recording time parameter
•
EDGEVISION = Physical EdgeVision device
•
EDGEVISION_INPUT = EdgeVision input port (conceptually the same as a
Densité frame slot)
•
GC100 = Global Caché GC-100 Network Adapter
•
HCP1801 = HCP-1801 HD/SD Video Control Probe with Embedded Audio
•
SCP‐1121 = SDI Control Probe with Embedded Audio
•
STB = Set-Top Box
•
STBTUNER = Set-Top Box model
•
UAP1781 = UAP-1781 8-Channel Universal Audio Processor
•
UAP1783 = UAP-1783 8-Channel Universal Audio Processor
•
VCP1021 = VCP-1021 Composite Control Probe
•
VIRTUAL = Represents a Densité probe and the associated cycling profiles
Mandatory.
•DENSITE
•PDU
•GC100
APP SERVER ID ID of the associated Application Server (e.g.
APPSERVER1).
Case sensitive.
Mandatory.
VIRTUAL DEVICE
(VIRTUAL PROBE)
CYCLER ID ID of the cycler associated with a specific probe.
2