Setup guide

iControl Edge
Installation and Setup Guide
79
If you have other models of set-top boxes, you will need to create custom configuration files
based on a template that is also located on the application server.
Downloading the Configuration File Template from the Application Server
To download the configuration file template to your workstation
1. Launch WinSCP. If you do not have WinSCP installed on your PC, see "Installing WinSCP", on
page 125.
2. Log on to the Application Server (see "Logging on to an Application Server from WinSCP",
on page 129).
The main WinSCP window opens, showing the files on your PC in the left panel, and the files
on the Application Server in the right panel.
3. On the Application Server side, navigate to
/var/tomcat4/webapps/icw/sites/EDGE/Config.
Notes
• Predefined configuration files for the GC-100 have a
.conf file extension, and
are located on the Application Server (under
var/tomcat4/webapps/icw/sites/EDGE/Config).
• Customized configuration files must be uploaded to
/usr/local/iControl/bin/conf/GC100.
•In the Devices worksheet, you must specify only the file name, but not the
.conf extension (see "Devices Worksheet", on page 86).
You can access the top
You can access the root