Setup guide
Table Of Contents
- Introduction to iControl Edge
- System Requirements
- Installation and Setup
- Key Concepts
- Task 1: Preparing to Install an iControl Edge System
- Task 2: Installing the iControl Application Server
- Task 3: Preparing a PC for Configuring the Application Server
- Task 4: Configuring the Application Server
- Task 5: Installing & Configuring EdgeVision Devices
- Task 6: Installing & Configuring Densité Systems
- Task 7: Installing & Configuring GC-100 Network Adapters
- Task 8: Installing Set-Top Boxes
- Task 9: Installing & Configuring Allégro Systems
- Task 10: Verification & Readiness Check
- Task 11: Managing the iControl Edge Configuration Files
- Task 12: Uploading and Applying iControl Edge Configuration Files
- Key Concepts
- Troubleshooting
- Installing PuTTY
- Using WinSCP
- Contact Us!
Installation and Setup
Viewing the Status and Configuring the Options
52
5. You can view the status of an Input by opening the Input # panel. To refresh the list of status’,
click the Refresh button. The following input status fields appears:
Health status fields
Status field Definition
Fan A/B status Displays the current operational status of the cooling fans inside the EdgeVision
device.
Frame revision Displays the version number of the chassis that contains the hardware for the
EdgeVision device.
Hardware revision Displays the revision number for the hardware in the EdgeVision device.
Optional power supply B status Displays the current operational status of the secondary (B) power supply.
Power supply A/B status Displays the current operational status of the primary (A) power supply.
SDI out option presence Indicates if the SDI out option is present on the EdgeVision device.
Temperature front/rear Displays the current temperature in the front of the device (where the LEDs
reside) and in the rear of the device (where the connectors are located).
Temperature front alarm/rear alarm Indicates if the current temperature in the front or rear of the device has
exceeded optimal limits.
Software version Displays the current build version of EdgeVision Configurator and EdgeVision
Player on this device.