Setup guide

Installation and Setup
Configuring Host Addresses
34
5. Click Save.
6. Return to the Network Configuration page by clicking the Return arrow at the bottom of the
Hostname and DNS Client page.
Configuring Host Addresses
To configure host addresses
1. On the Network Configuration page, click Host Addresses.
The Host Addresses page appears. The currently defined hosts are listed, showing the
IP address and host name of each.
Search Domains Click Listed, and then type a list of all the domains where you wish to have
the Application Server look for DNS services (one line per domain). You
should type at least your own local domain name (e.g.
miranda.com).
Note: Clicking Save does not update the Application Server with the new
configuration. To apply your changes, you still need to click Apply Configuration on
the Network Configuration page or restart the system through Webmin
(see "Restarting the System and Verifying the Configuration", on page 39).
Note: Do not click Apply Configuration on the Network Configuration page.
REQUIREMENT
Before beginning this procedure, make sure you have navigated to the Network
Configuration page of Webmin (see page 29).
Notes
• The first entry is predefined and should be left as found:
• IP Address:
127.0.0.1
•Hostname:localhost.localdomain,localhost
• The host name you defined in of should be listed here. However, you will
need to assign an appropriate IP address to this Application Server.
( Conti nued )