Setup guide

iControl Edge
Installation and Setup Guide
19
You should inspect the shipping containers at each location to make sure that the equipment
arrived undamaged, and that all materials are included. If any items are missing or damaged,
contact your distributor or Miranda Technologies Inc.
Make sure the following items have been shipped with your Application Servers:
 Application Server
 Application Server hardware documentation
 Dell Installation DVD
 Rack mounting kit (rails, screws and washers)
 Power cord
If applicable, make sure the following items have been shipped with your EdgeVision units:
 EdgeVision unit
 Printed user documentation (Quick Start Guide)
 Audio/Video connector cables
 Ground lug
 Power cord
 Infrared cables
Table 3-1: Traditional hardware setup for iControl Edge (without EdgeVision)
Functionality Network Operations
Center (NOC)
Each peripheral site
Monitoring and control 1 × Application Server 1 × Application Server
Signal probing, alarming,
thumbnails
n × Densité frames
Cycling set-top box n × Global Caché GC-100 network
adapters (IC-STB-CTL)
Video stream source 1 × Allégro-1 Analog system (if remote
monitoring taking place at this location)
Table 3-2: Typical hardware setup for iControl Edge (using EdgeVision)
Functionality Network Operations Center (NOC) Each peripheral site
Monitoring and control 1 × Application Server 1 × Application Server
Signal probing and
alarming
1×EdgeVision
1
1. If your setup requires recording a stream’s signal, you must still use an external DVR to do so.
Cycling set-top box
Video stream source