Setup guide
Table Of Contents
- Introduction to iControl Edge
- System Requirements
- Installation and Setup
- Key Concepts
- Task 1: Preparing to Install an iControl Edge System
- Task 2: Installing the iControl Application Server
- Task 3: Preparing a PC for Configuring the Application Server
- Task 4: Configuring the Application Server
- Task 5: Installing & Configuring EdgeVision Devices
- Task 6: Installing & Configuring Densité Systems
- Task 7: Installing & Configuring GC-100 Network Adapters
- Task 8: Installing Set-Top Boxes
- Task 9: Installing & Configuring Allégro Systems
- Task 10: Verification & Readiness Check
- Task 11: Managing the iControl Edge Configuration Files
- Task 12: Uploading and Applying iControl Edge Configuration Files
- Key Concepts
- Troubleshooting
- Installing PuTTY
- Using WinSCP
- Contact Us!
iControl Edge
Installation and Setup Guide
99
Services Worksheet
The Services worksheet is used to define the services or channels assigned to a path:
Services worksheet (part 1)
Services worksheet (part 2)
Table 3-5, below, describes the worksheet contents:
Table 3-5: Services worksheet contents
Column Description
** Two asterisks (**), with no spaces, are positioned in the first column to indicate rows to be
ignored, such as rows containing column headers, or intended for future use.
1
ID The unique indentifier for the service. This ID is used to reference the service within and between
spreadsheets.
Mandatory.
TYPE Must be
STB.
ENABLE Type
YES to enable a service, NO to disable it for troubleshooting or maintenance. The
corresponding Channel Selector button will then be hidden (i.e. replaced with an unlabeled
unavailable button).