Operating instructions

GUIDE TO INSTALLATION AND OPERATION
34 | FRS-1801
Levels associated with these alarms:
The pulldown lists may contain some or all of the following options:
The alarm makes no contribution (black icon)
The alarm is of minor importance (yellow icon)
The alarm is of major importance (orange icon)
The alarm is of critical importance (red icon)
The alarm exists but has no effect (used for text and composite alarms)
Shortcut: if you click in one of the columns beside a major heading in the Status/Name column (where
there is no pulldown shown), you will open an “invisible” pulldown that lets you assign a level to all alarms
in that section of the column simultaneously.
Log Events
iControl maintains a log of alarm events associated with the card. The log is useful for troubleshooting and
identifying event sequences. Click in the checkbox to enable logging of alarm events for each individual
alarm.
At the bottom of the window are several other controls
Overall follow LED
Click in the checkbox to force the Overall alarm to be
identical to the Card LED status
• All Overall alarms for which there is a Card LED
alarm will be forced to match the Card LED alarm
• All Overall Alarms for which there is no Card LED
alarm will be forced to Disabled
A warning box will open allowing you to confirm the
action, since it will result in changes to the configuration
and there is no undo function.
Copy to other cards
Click this button to open a panel that allows
the alarm configuration set for this card to
be copied into another FRS-1801 card.
• Select one or more destination cards
from the list in the window by clicking
in the checkboxes, or all of them by
clicking in the All checkbox
• Note that when you do a Copy Profile
for this card (see Sect.3.4.14), the
alarm configuration is copied along
with all the other settings.
Figure 3.39 Overall follow LED warning
Figure 3.40 Copy to other cards