Operating instructions

GUIDE TO INSTALLATION AND OPERATION
30 | FRS-1801
3.4.14 The Factory/Presets panel
Load Factory: Clicking this button will restore the
card to a factory default state.
• Note that User Presets are not changed
User Presets
The FRS-1801 has memory registers which can
hold up to 5 user-defined parameter settings. The
first 4 user presets can be recalled by GPI 1 to 4.
Select any one of the five presets using the pull-
down list. The name of the currently-selected User
Preset is shown on the name bar.
Click Load to load the contents of the selected
User Preset into the FRS-1801. All parameter
settings and values will be replaced by the contents
of the selected User Preset.
Click Save to store the current parameter settings
and values from the FRS-1801 into the selected
User Preset. The existing contents of the preset will
be overwritten.
Profiles
This section provides the option to save and recover the entire card configuration (including user presets if
desired) on an external disk, or to copy it to another FRS-1801 card.
Click on Profiles to open the Profile Copy window.
Figure 3.34 Copy Profile for Card window
Copy profile from section
This line shows this FRS-1801 card, and identifies it by App server, Densité frame and slot number, card
type and firmware version.
Figure 3.33 Factory/Presets panel