Operating instructions

GUIDE TO INSTALLATION AND OPERATION
12 | FRS-1801
Icon #4 – Reference
(green)
Reference OK. Mouse over to see the source of the reference, and its format, e.g.
external, NTSC
(red)
Reference mismatch or Missing reference
(gray)
Reference absent
Icon #5 – Operation Mode
(green)
Operation mode: process – normal processing of the input signal
(yellow)
Operation mode: TEST – color bar and audio test tones enabled (see Sect. 3.4.13)
(yellow)
Operation mode: Manual Freeze ON (see Sect. 3.4.2 – Freeze tab)
Icon #6 – Health Monitoring
(green)
Hardware OK
(red)
Hardware Health Monitoring (Fan1, Fan2, Hardware fault detected)
If this icon appears red, return the card to Miranda.
2. The left portion of the window contains all the parameter groups, which become highlighted when they
are selected; the main panel (4) then displays the group’s set of parameters. Each of the groups is described
in detail below.
3. The lower section of the window identifies the Preset currently in use, or “Custom” if none is applicable.
4. The main panel contains all the parameters specific to the group selected. It may contain several tabs to
help manage the different parameters.
Each of the panels associated with the groups accessed from the buttons in Section 2, and shown in Section
4, is described individually in the following sections.