Operating instructions

GUIDE TO INSTALLATION AND OPERATION
FRS-1801 | 11
Table –iControl Status Icon interpretation
Icon #1 – Manual Card Configuration
(green)
Remote card control activated. The iControl interface can be used to operate the card
(yellow)
Local card control active, The card is being controlled using the Densité frame control
panel, as described in section 3.3. Any changes made using the iControl interface will have
no effect on the card.
Icon #2 – Input status
(green)
Signal detected and valid.
• Beneath the icon, the format will be indicated as HD or SD, and the specific format
details will be listed if the cursor is moved over the icon.
(red)
Signal absent
No rear
Reference mismatch
Video/TRS error
Icon #3 – Audio Status
(green)
Audio OK
(yellow)
Yellow alarm condition detected on 1 or more channels
(red)
Red alarm condition detected on 1 or more channels
(gray)
All audio disabled
(red)
Card System Mismatch – the audio cards detected on the ABUS do not match the
configuration selected in the ABUS panel