Operating instructions

GUIDE TO INSTALLATION AND OPERATION
FRS-1801 | 9
[SELECT] Gives access to the next menu level. When a parameter value is shown, pushing this button
once enables modification of the value using the [+] and [–] buttons; a second push confirms the
new value
[ESC] Cancels the effect of parameter value changes that have not been confirmed; pushing [ESC]
causes the parameter to revert to its former value.
Pushing [ESC] moves the user back up to the previous menu level. At the main menu, [ESC]
does not exit the menu system. To exit, re-push the [SELECT] button for the card being
controlled.
If no controls are operated for 30 seconds, the controller reverts to its normal standby status, and the
selected card’s STATUS LED reverts to its normal operating mode.
3.3.2 Menu for local control
The FRS-1801 has operating parameters which may be adjusted locally at the controller card interface.
• Press the SELECT button on the FRS-1801 front card edge to assign the Densité frame’s local
control panel to the FRS-1801
• Use the keys on the local control panel to step through the displayed menu to configure and adjust
the FRS-1801.
The complete menu structure is shown in Annex 1 to this document, beginning on page 40.
3.4 Remote control using iControl
The operation of the FRS-1801 may be controlled using Miranda’s iControl system.
• This manual describes the control panels associated with the FRS-1801 and their use.
• Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the FRS-1801 icon to open the control panel.