User manual

Revision: 0 8
Technical specifications are subject to be changed without notice
Switch 1 2 3 4 Address
- - - - 0
- - - * 1
- - * - 2
- - * * 3
- * - - 4
- * - * 5
- * * - 6
- * * * 7
* - - - 8
* - - * 9
* - * - 10
* - * * 11
* * - - 12
* * - * 13
* * * - 14
* * * * 15
5.2. Router mode
The NTW-VD3232 router allows switching in different modes. You can choose among:
32x32 Serial Digital Video 1 layer
16x16 Serial Digital Video 2 layer
10x10 Serial Digital Video 3 layer
8x8 Serial Digital Video 4 layer
Switch 5 - 6 on the configuration switch SW A set the router’s mode. The i-Control software must be configured according to
the mode chosen on the router.
The modes can be switched according to the following pattern:
- means switch down
* means switch up
Switch 5 6 Mode
- - 32x32 Serial Digital Video 1 layer
- * 16x16 Serial Digital Video 2 layer
* - 10x10 Serial Digital Video 3 layer
* * 8x8 Serial Digital Video 4 layer
Default mode is 32x32 Serial Digital Video 1 layer.