Operating instructions

1-8 Intuition XG Installation & Quick Start Guide

Introduction

Overview of the Intuition XG-3U/Dual chassis

The Intuition XG unit is a 3RU rackmount rendering platform that incorporates redundant fans,

three power supplies, and 1 TB RAID1-enabled storage (optional 2 TB RAID10 expansion).

The only visible difference between the 3RU models of the Intuition XG is that the single

channel model (XG-3U-e) has only one (1) discrete AES audio connector, while the dual

channel model (XG-Dual-e) has two (2) discrete AES audio connectors.

In some cases, the positioning of the connectors on the Intuition XG’s rear panel differs

depending upon the hardware options installed. See page 1-6

for a list of the Intuition XG’s

hardware options.

The following table summarizes the Intuition XG’s physical dimensions and power consumption:

Consult the following sections to familiarize yourself with the Intuition XG’s front and rear

panel components:

• “Front panel components (Intuition XG-3U/Dual)” on page 1-9

• “Rear panel components (Intuition XG-3U/Dual)” on page 1-10

Chassis FORM: 3U rackmount chassis

HEIGHT: 5.2” (132 mm)

IDTH: 17.7” (450 mm)

DEPTH: 25.5” (648 mm)

Power consumption AC input: 100 - 240V, 50 - 60 Hz

Consumption: 4.05 - 1.73A

Power: 410 max.

Temperature Ambient temperature: 35 C

Note: This shall be the maximum internal

temperature within the rack in which the

Vertigo XG unit is installed.