Operating instructions

Kaleido-X16
Quick Start Guide
ii
Safety Compliance Information
Safety Compliance
This equipment complies with:
• CAN/CSA C22.2 No. 60950-1-07 Safety of Information Technology Equipment, Including Electrical
Business Equipment
• UL60950-1 (2nd Edition) Safety of Information Technology Equipment, Including Electrical Business
Equipment
• IEC60950 (2nd Edition) / Safety of Information Technology Equipment, Including Electrical Business
Equipment
Electromagnetic Compatibility
This equipment has been tested for verification of compliance with FCC Part 15, Subpart B, class A
requirements for Digital Devices.
This equipment complies with the requirements of:
• EN 55022 Class A, Radiated Emissions.
• EN 55022 Class A, Conducted Emissions
• EN 61000-4-2, -3, & -11 Electromagnetic Immunity
• EN 61000-3-2 & -3-3, Disturbance in Supply Systems
Warranty Policies
Warranty information is available in the Support section of the Miranda Web site (http://
www.miranda.com).
CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that contained in the
operating instructions unless you are qualified to do so. Refer all servicing to qualified service
personnel. Servicing should be done in a static-free environment.